Are you sure you want to perform this action?
Architek double xxl custom-made shower tray with dual drainage
The ARCHITEK DOUBLE shower tray is designed for very large walk-in showers requiring a dual drainage system. Made to measure from Akrytan® mineral resin, it allows the position of the drains to be customised to perfectly accommodate the most demanding technical constraints and architectural projects.
Description
XXL shower tray with customisable dual drainage
The ARCHITEK DOUBLE shower tray has been specially developed for large-scale shower projects requiring enhanced drainage capacity.
Thanks to its dual-drain system, it improves water drainage across very large areas whilst maintaining an elegant, contemporary aesthetic.
Its bespoke design allows the positioning of the drains to be precisely adapted to the technical constraints of the site, offering a level of design freedom rarely found in traditional shower trays.
An ideal solution for very large walk-in showers
XXL showers often require optimised drainage management to ensure rapid and even water flow.
The ARCHITEK DOUBLE model perfectly meets this requirement thanks to its two drainage points, which significantly improve the shower tray’s hydraulic performance.
This solution is particularly well-suited to large bathrooms, master suites, wellness areas and high-end architectural projects.
Fully customisable drain positioning
The real strength of the ARCHITEK DOUBLE shower tray lies in its ability to adapt to any project.
The position of the two drains can be tailored to your requirements to facilitate installation, overcome specific technical constraints or optimise the overall aesthetics of the shower.
This flexibility allows you to design a shower tray perfectly suited to any layout, even the most complex.
High-performance Akrytan® mineral resin
The ARCHITEK DOUBLE shower tray is manufactured from Akrytan® mineral resin, a material combining through-coloured resin, high-density mineral fillers and a high-quality sanitary finish.
This technology results in a robust shower tray whilst reducing its weight by more than 30 per cent compared to traditional solutions.
The material’s structure ensures excellent resistance to impact, moisture and everyday wear and tear.
An elegant, contemporary smooth finish
The smooth finish of the ARCHITEK DOUBLE model offers a modern aesthetic particularly suited to contemporary bathrooms.
Its uniform, minimalist appearance fits perfectly into high-end projects seeking clean lines and a refined finish.
This surface also makes daily cleaning and maintenance easier.
Long-lasting protection and simplified maintenance
The sanitary finish effectively protects the surface against:
• Moisture
• Chemicals
• Dyes
• Micro-organisms
• Daily wear and tear
• UV rays
The shower tray thus retains its appearance and performance over the long term.
XXL bespoke manufacturing
Each shower tray is manufactured to order according to the specific requirements of your project.
Available dimensions:
• Width: from 50 to 150 cm
• Length: from 60 to 300 cm
• Customisable dual drainage
• Bespoke manufacturing
• Smooth finish
This great design flexibility allows us to meet the demands of even the most ambitious projects.
The benefits of the ARCHITEK DOUBLE shower tray
• Integrated dual drainage
• Customisable drain positioning
• XXL shower tray up to 300 cm
• Made to measure
• Extra-flat shower tray
• Akrytan® mineral resin
• Contemporary smooth finish
• Non-slip surface
• Antibacterial treatment
• Dye-through
• Hydrolysis-free
• High UV resistance
• Repairable
• Can be cut to size
• Lightweight and robust
• High mechanical strength
• Easy to maintain
A unique solution for non-standard projects
The ARCHITEK DOUBLE shower tray meets the demands of even the most complex projects whilst maintaining a high-end finish.
Thanks to its XXL dimensions, dual drainage system and full customisation options, it is the ideal solution for large walk-in showers and bespoke architectural designs.
Items included
• Two drain outlets with horizontal discharge
• Stainless steel plates
Available options
• Drain outlets with vertical discharge and a Ø90 mm hole
Delivery
• Made to measure: approximately 35 days
• Delivery: an additional 5 to 6 days
• Free delivery
The ARCHITEK DOUBLE shower tray is the ideal solution for projects requiring a high-performance dual drainage system, fully customised manufacturing and dimensions of up to 300 cm in length.
FAQ – ARCHITEK DOUBLE shower tray
What makes the ARCHITEK DOUBLE shower tray special?
The ARCHITEK DOUBLE model features two drains, the positioning of which can be customised to suit the project’s requirements.
Why choose a dual drainage system?
The dual drainage system improves water flow across very large areas and is ideal for XXL showers.
Can the drains be positioned freely?
Yes. The positioning of the two drains can be customised to suit your installation.
Is the shower tray made to measure?
Yes. Each shower tray is manufactured to the nearest centimetre according to the desired dimensions and layout.
What sizes are available?
The shower tray can be manufactured in widths from 50 to 150 cm and lengths from 60 to 300 cm.
What is Akrytan® resin?
Akrytan® is a high-performance mineral resin renowned for its lightness, strength and durability.
Is the shower tray suitable for large walk-in showers?
Yes. It has been specially designed for XXL showers and projects requiring a higher drainage capacity.
Can the shower tray be cut to size?
Yes. The shower tray can be cut to size to facilitate certain adjustments during installation.
What accessories are included?
The shower tray is supplied with two horizontal-outlet drains and two stainless steel plates.
What is the lead time?
The average lead time is approximately 35 days, plus a further 5 to 6 days for delivery.
The ARCHITEK DOUBLE shower tray has been specially developed for large-scale shower projects requiring enhanced drainage capacity.
Thanks to its dual-drain system, it improves water drainage across very large areas whilst maintaining an elegant, contemporary aesthetic.
Its bespoke design allows the positioning of the drains to be precisely adapted to the technical constraints of the site, offering a level of design freedom rarely found in traditional shower trays.
An ideal solution for very large walk-in showers
XXL showers often require optimised drainage management to ensure rapid and even water flow.
The ARCHITEK DOUBLE model perfectly meets this requirement thanks to its two drainage points, which significantly improve the shower tray’s hydraulic performance.
This solution is particularly well-suited to large bathrooms, master suites, wellness areas and high-end architectural projects.
Fully customisable drain positioning
The real strength of the ARCHITEK DOUBLE shower tray lies in its ability to adapt to any project.
The position of the two drains can be tailored to your requirements to facilitate installation, overcome specific technical constraints or optimise the overall aesthetics of the shower.
This flexibility allows you to design a shower tray perfectly suited to any layout, even the most complex.
High-performance Akrytan® mineral resin
The ARCHITEK DOUBLE shower tray is manufactured from Akrytan® mineral resin, a material combining through-coloured resin, high-density mineral fillers and a high-quality sanitary finish.
This technology results in a robust shower tray whilst reducing its weight by more than 30 per cent compared to traditional solutions.
The material’s structure ensures excellent resistance to impact, moisture and everyday wear and tear.
An elegant, contemporary smooth finish
The smooth finish of the ARCHITEK DOUBLE model offers a modern aesthetic particularly suited to contemporary bathrooms.
Its uniform, minimalist appearance fits perfectly into high-end projects seeking clean lines and a refined finish.
This surface also makes daily cleaning and maintenance easier.
Long-lasting protection and simplified maintenance
The sanitary finish effectively protects the surface against:
• Moisture
• Chemicals
• Dyes
• Micro-organisms
• Daily wear and tear
• UV rays
The shower tray thus retains its appearance and performance over the long term.
XXL bespoke manufacturing
Each shower tray is manufactured to order according to the specific requirements of your project.
Available dimensions:
• Width: from 50 to 150 cm
• Length: from 60 to 300 cm
• Customisable dual drainage
• Bespoke manufacturing
• Smooth finish
This great design flexibility allows us to meet the demands of even the most ambitious projects.
The benefits of the ARCHITEK DOUBLE shower tray
• Integrated dual drainage
• Customisable drain positioning
• XXL shower tray up to 300 cm
• Made to measure
• Extra-flat shower tray
• Akrytan® mineral resin
• Contemporary smooth finish
• Non-slip surface
• Antibacterial treatment
• Dye-through
• Hydrolysis-free
• High UV resistance
• Repairable
• Can be cut to size
• Lightweight and robust
• High mechanical strength
• Easy to maintain
A unique solution for non-standard projects
The ARCHITEK DOUBLE shower tray meets the demands of even the most complex projects whilst maintaining a high-end finish.
Thanks to its XXL dimensions, dual drainage system and full customisation options, it is the ideal solution for large walk-in showers and bespoke architectural designs.
Items included
• Two drain outlets with horizontal discharge
• Stainless steel plates
Available options
• Drain outlets with vertical discharge and a Ø90 mm hole
Delivery
• Made to measure: approximately 35 days
• Delivery: an additional 5 to 6 days
• Free delivery
The ARCHITEK DOUBLE shower tray is the ideal solution for projects requiring a high-performance dual drainage system, fully customised manufacturing and dimensions of up to 300 cm in length.
FAQ – ARCHITEK DOUBLE shower tray
What makes the ARCHITEK DOUBLE shower tray special?
The ARCHITEK DOUBLE model features two drains, the positioning of which can be customised to suit the project’s requirements.
Why choose a dual drainage system?
The dual drainage system improves water flow across very large areas and is ideal for XXL showers.
Can the drains be positioned freely?
Yes. The positioning of the two drains can be customised to suit your installation.
Is the shower tray made to measure?
Yes. Each shower tray is manufactured to the nearest centimetre according to the desired dimensions and layout.
What sizes are available?
The shower tray can be manufactured in widths from 50 to 150 cm and lengths from 60 to 300 cm.
What is Akrytan® resin?
Akrytan® is a high-performance mineral resin renowned for its lightness, strength and durability.
Is the shower tray suitable for large walk-in showers?
Yes. It has been specially designed for XXL showers and projects requiring a higher drainage capacity.
Can the shower tray be cut to size?
Yes. The shower tray can be cut to size to facilitate certain adjustments during installation.
What accessories are included?
The shower tray is supplied with two horizontal-outlet drains and two stainless steel plates.
What is the lead time?
The average lead time is approximately 35 days, plus a further 5 to 6 days for delivery.
Technical Schemas
Installation advice
Tips
Videos
Download fiche PDF
XXL shower tray with customisable dual drainage
The ARCHITEK DOUBLE shower tray has been specially developed for large-scale shower projects requiring enhanced drainage capacity.
Thanks to its dual-drain system, it improves water drainage across very large areas whilst maintaining an elegant, contemporary aesthetic.
Its bespoke design allows the positioning of the drains to be precisely adapted to the technical constraints of the site, offering a level of design freedom rarely found in traditional shower trays.
An ideal solution for very large walk-in showers
XXL showers often require optimised drainage management to ensure rapid and even water flow.
The ARCHITEK DOUBLE model perfectly meets this requirement thanks to its two drainage points, which significantly improve the shower tray’s hydraulic performance.
This solution is particularly well-suited to large bathrooms, master suites, wellness areas and high-end architectural projects.
Fully customisable drain positioning
The real strength of the ARCHITEK DOUBLE shower tray lies in its ability to adapt to any project.
The position of the two drains can be tailored to your requirements to facilitate installation, overcome specific technical constraints or optimise the overall aesthetics of the shower.
This flexibility allows you to design a shower tray perfectly suited to any layout, even the most complex.
High-performance Akrytan® mineral resin
The ARCHITEK DOUBLE shower tray is manufactured from Akrytan® mineral resin, a material combining through-coloured resin, high-density mineral fillers and a high-quality sanitary finish.
This technology results in a robust shower tray whilst reducing its weight by more than 30 per cent compared to traditional solutions.
The material’s structure ensures excellent resistance to impact, moisture and everyday wear and tear.
An elegant, contemporary smooth finish
The smooth finish of the ARCHITEK DOUBLE model offers a modern aesthetic particularly suited to contemporary bathrooms.
Its uniform, minimalist appearance fits perfectly into high-end projects seeking clean lines and a refined finish.
This surface also makes daily cleaning and maintenance easier.
Long-lasting protection and simplified maintenance
The sanitary finish effectively protects the surface against:
• Moisture
• Chemicals
• Dyes
• Micro-organisms
• Daily wear and tear
• UV rays
The shower tray thus retains its appearance and performance over the long term.
XXL bespoke manufacturing
Each shower tray is manufactured to order according to the specific requirements of your project.
Available dimensions:
• Width: from 50 to 150 cm
• Length: from 60 to 300 cm
• Customisable dual drainage
• Bespoke manufacturing
• Smooth finish
This great design flexibility allows us to meet the demands of even the most ambitious projects.
The benefits of the ARCHITEK DOUBLE shower tray
• Integrated dual drainage
• Customisable drain positioning
• XXL shower tray up to 300 cm
• Made to measure
• Extra-flat shower tray
• Akrytan® mineral resin
• Contemporary smooth finish
• Non-slip surface
• Antibacterial treatment
• Dye-through
• Hydrolysis-free
• High UV resistance
• Repairable
• Can be cut to size
• Lightweight and robust
• High mechanical strength
• Easy to maintain
A unique solution for non-standard projects
The ARCHITEK DOUBLE shower tray meets the demands of even the most complex projects whilst maintaining a high-end finish.
Thanks to its XXL dimensions, dual drainage system and full customisation options, it is the ideal solution for large walk-in showers and bespoke architectural designs.
Items included
• Two drain outlets with horizontal discharge
• Stainless steel plates
Available options
• Drain outlets with vertical discharge and a Ø90 mm hole
Delivery
• Made to measure: approximately 35 days
• Delivery: an additional 5 to 6 days
• Free delivery
The ARCHITEK DOUBLE shower tray is the ideal solution for projects requiring a high-performance dual drainage system, fully customised manufacturing and dimensions of up to 300 cm in length.
FAQ – ARCHITEK DOUBLE shower tray
What makes the ARCHITEK DOUBLE shower tray special?
The ARCHITEK DOUBLE model features two drains, the positioning of which can be customised to suit the project’s requirements.
Why choose a dual drainage system?
The dual drainage system improves water flow across very large areas and is ideal for XXL showers.
Can the drains be positioned freely?
Yes. The positioning of the two drains can be customised to suit your installation.
Is the shower tray made to measure?
Yes. Each shower tray is manufactured to the nearest centimetre according to the desired dimensions and layout.
What sizes are available?
The shower tray can be manufactured in widths from 50 to 150 cm and lengths from 60 to 300 cm.
What is Akrytan® resin?
Akrytan® is a high-performance mineral resin renowned for its lightness, strength and durability.
Is the shower tray suitable for large walk-in showers?
Yes. It has been specially designed for XXL showers and projects requiring a higher drainage capacity.
Can the shower tray be cut to size?
Yes. The shower tray can be cut to size to facilitate certain adjustments during installation.
What accessories are included?
The shower tray is supplied with two horizontal-outlet drains and two stainless steel plates.
What is the lead time?
The average lead time is approximately 35 days, plus a further 5 to 6 days for delivery.
The ARCHITEK DOUBLE shower tray has been specially developed for large-scale shower projects requiring enhanced drainage capacity.
Thanks to its dual-drain system, it improves water drainage across very large areas whilst maintaining an elegant, contemporary aesthetic.
Its bespoke design allows the positioning of the drains to be precisely adapted to the technical constraints of the site, offering a level of design freedom rarely found in traditional shower trays.
An ideal solution for very large walk-in showers
XXL showers often require optimised drainage management to ensure rapid and even water flow.
The ARCHITEK DOUBLE model perfectly meets this requirement thanks to its two drainage points, which significantly improve the shower tray’s hydraulic performance.
This solution is particularly well-suited to large bathrooms, master suites, wellness areas and high-end architectural projects.
Fully customisable drain positioning
The real strength of the ARCHITEK DOUBLE shower tray lies in its ability to adapt to any project.
The position of the two drains can be tailored to your requirements to facilitate installation, overcome specific technical constraints or optimise the overall aesthetics of the shower.
This flexibility allows you to design a shower tray perfectly suited to any layout, even the most complex.
High-performance Akrytan® mineral resin
The ARCHITEK DOUBLE shower tray is manufactured from Akrytan® mineral resin, a material combining through-coloured resin, high-density mineral fillers and a high-quality sanitary finish.
This technology results in a robust shower tray whilst reducing its weight by more than 30 per cent compared to traditional solutions.
The material’s structure ensures excellent resistance to impact, moisture and everyday wear and tear.
An elegant, contemporary smooth finish
The smooth finish of the ARCHITEK DOUBLE model offers a modern aesthetic particularly suited to contemporary bathrooms.
Its uniform, minimalist appearance fits perfectly into high-end projects seeking clean lines and a refined finish.
This surface also makes daily cleaning and maintenance easier.
Long-lasting protection and simplified maintenance
The sanitary finish effectively protects the surface against:
• Moisture
• Chemicals
• Dyes
• Micro-organisms
• Daily wear and tear
• UV rays
The shower tray thus retains its appearance and performance over the long term.
XXL bespoke manufacturing
Each shower tray is manufactured to order according to the specific requirements of your project.
Available dimensions:
• Width: from 50 to 150 cm
• Length: from 60 to 300 cm
• Customisable dual drainage
• Bespoke manufacturing
• Smooth finish
This great design flexibility allows us to meet the demands of even the most ambitious projects.
The benefits of the ARCHITEK DOUBLE shower tray
• Integrated dual drainage
• Customisable drain positioning
• XXL shower tray up to 300 cm
• Made to measure
• Extra-flat shower tray
• Akrytan® mineral resin
• Contemporary smooth finish
• Non-slip surface
• Antibacterial treatment
• Dye-through
• Hydrolysis-free
• High UV resistance
• Repairable
• Can be cut to size
• Lightweight and robust
• High mechanical strength
• Easy to maintain
A unique solution for non-standard projects
The ARCHITEK DOUBLE shower tray meets the demands of even the most complex projects whilst maintaining a high-end finish.
Thanks to its XXL dimensions, dual drainage system and full customisation options, it is the ideal solution for large walk-in showers and bespoke architectural designs.
Items included
• Two drain outlets with horizontal discharge
• Stainless steel plates
Available options
• Drain outlets with vertical discharge and a Ø90 mm hole
Delivery
• Made to measure: approximately 35 days
• Delivery: an additional 5 to 6 days
• Free delivery
The ARCHITEK DOUBLE shower tray is the ideal solution for projects requiring a high-performance dual drainage system, fully customised manufacturing and dimensions of up to 300 cm in length.
FAQ – ARCHITEK DOUBLE shower tray
What makes the ARCHITEK DOUBLE shower tray special?
The ARCHITEK DOUBLE model features two drains, the positioning of which can be customised to suit the project’s requirements.
Why choose a dual drainage system?
The dual drainage system improves water flow across very large areas and is ideal for XXL showers.
Can the drains be positioned freely?
Yes. The positioning of the two drains can be customised to suit your installation.
Is the shower tray made to measure?
Yes. Each shower tray is manufactured to the nearest centimetre according to the desired dimensions and layout.
What sizes are available?
The shower tray can be manufactured in widths from 50 to 150 cm and lengths from 60 to 300 cm.
What is Akrytan® resin?
Akrytan® is a high-performance mineral resin renowned for its lightness, strength and durability.
Is the shower tray suitable for large walk-in showers?
Yes. It has been specially designed for XXL showers and projects requiring a higher drainage capacity.
Can the shower tray be cut to size?
Yes. The shower tray can be cut to size to facilitate certain adjustments during installation.
What accessories are included?
The shower tray is supplied with two horizontal-outlet drains and two stainless steel plates.
What is the lead time?
The average lead time is approximately 35 days, plus a further 5 to 6 days for delivery.
Vous apprécierez également
Adjustable feet
Anti-overflow shower curb
Vertical outlet drain
€39.00
Colour grid